Cisco DPA 7610 Manual de usuario descargar pdf (Pagina 7)

Cisco DPA 7610 Voice Mail Gateway Version 1.1(1) Release Notes

78-12814-01

DPA 7610 Known Problems and Errata

CSCdt04499 Calls going through the

DPA 7610 immediately after a

port has registered with

Cisco CallManager might not

be answered by the Octel

system.

This is caused by Octel ports not being completely

ready to accept incoming calls until some time after

they are initialized.

To work around this, do not make calls through the

DPA 7610 until all the ports on the DPA 7610 have

been initialized.

CSCdt12455 The Octel 200 appears to take

a while to initialize its ports

when connected to the

DPA 7610.

The ports appear as initialized

on the DPA port status screen,

but using the “pstat”

command on the Octel 200,

the ports appear to be in “err”

state. Calls made through the

DPA 7610 while it is

initializing might be

unanswered by the voice mail

system.

To avoid this problem, allow more time for all the

Octel ports to initialize before making calls through

the DPA 7610.

CSCdt15035 The PBX ports on the DPA

7610 appear disabled, but they

are enabled in the Meridian 1

PBX.

The DPA 7610 requires all ports connected to the

Meridian 1 PBX to have key 6 configured as a MSB

key. If they do not have this, the DPA 7610 cannot

determine that the PBX ports are active. Therefore,

the ports appear to be disabled, and MWIs will not

work on PBX phones.

The DPA 7610 requires the all of the following keys

on ports connected to the PBX:

• 06 MSB (Make Set Busy)

• 13 MIK (Message Indication Key)

• 14 MCK (Message Cancel Key)

Table 1 DPA 7610 Known Problems (continued)

Bug ID Summary Explanation

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Comentarios a estos manuales

Sin comentarios

Cisco DPA 7610 Manual de usuario Pagina 7

Comentarios a estos manuales

Relacionado con productos y manuales para Gateways / Controladores Cisco DPA 7610