Cisco 3200 Series Manual de usuario descargar pdf (Pagina 21)

2-5

Cisco 3200 Series Router Hardware Upgrade Guide

OL-15983-01

Chapter 2 Replacing Cards in the Cisco 3230 ISR Rugged Enclosure

Card Replacement Process

Removing the I/O End Cap

To remove the I/O end cap, follow these steps:

Step 1 Using a 3/8-inch socket wrench to loosen the four 1/4-20 bolts on the end cap.

Note If a protective end cap cover (see Figure 2-16) is used to provide weatherproof protection for the

ports on the I/O end cap, loosening the four 1/4-20 mounting bolts on the protective end cap

allows you to remove the protective end cap and the I/O end cap from the extrusion.

Step 2 Carefully remove the I/O end cap and pull the end cap I/O cable out from under the card stack to free

the end cap (see

Figure 2-4).

Figure 2-4 I/O End Cap Removal

Step 3 Place the end cap on your work surface.

270461

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 59 60

Sin comentarios

Cisco 3200 Series Manual de usuario Pagina 21