Cisco MDS 9200 Series Guía de instalación Pagina 116
- Pagina / 164
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
A-6
Cisco MDS 9200 Series Hardware Installation Guide
OL-16188-01
Appendix A Cabinet and Rack Installation
Cisco MDS 9000 Family telco and EIA Shelf Bracket
Installing the Shelf Bracket Kit into a Two-Post telco Rack
Figure A-1 shows the installation of the shelf bracket kit into a two-post telco rack.
Figure A-1 Installing the Shelf Bracket Kit into a telco Rack
To install the shelf brackets in a telco rack, follow these steps:
Step 1 Position a shelf bracket inside a rack-mounting rail as shown in Figure A-1. Align the screw holes at the
front of the shelf bracket with the holes in the rack-mounting rail. Then, attach the shelf bracket to the
rack-mounting rail using a minimum of four 12-24 or 10-24 screws.
Note The bottom hole of the shelf bracket should align with the bottom hole of a rack unit on the
rack-mounting rail (the hole immediately above the 1/2-in. spacing).
Step 2 Repeat with the other shelf bracket.
Step 3 Verify that the shelf brackets are at the same height (using the level or tape measure as desired).
Step 4 Attach the crossbar to the rear of the shelf brackets as shown in Figure A-1, using the 10-32 screws.
1 Rack-mounting rail (2x) 3 10-32 screws (2x)
2 Shelf bracket (2x) 4 Crossbar
1
2
3
4
105088
- Installation Guide 1
- CONTENTS 3
- Contents 4
- OL-16188-01 10
- New and Changed Information 10
- OL-xxxxx-xx 11
- Audience 13
- Organization 13
- Conventions 14
- Related Documentation 16
- Command-Line Interface 17
- Troubleshooting and Reference 17
- Guidelines 18
- Product Overview 19
- Chassis 20
- Integrated Supervisor Modules 23
- Gigabit Ethernet Module 24
- Interface Modules 28
- LEDs on the Interface Module 29
- Switching Modules 30
- Switching Modules 31
- Switching Module Features 36
- Services Modules 38
- Services Modules 39
- IP Storage Services Modules 42
- Caching Services Module 48
- 1 Disk drive 2 3 Battery 2 50
- 2 Disk drive 1 4 Battery 1 50
- Power Supplies 52
- Fan Module 53
- Supported Transceivers 53
- X2 Fibre Channel Transceivers 54
- Supported Transceivers 55
- Preinstallation 58
- Installation Guidelines 59
- 2 Slider rail 66
- Clearance 67
- Rail Spacings 68
- Front cabinet 73
- Rear cabinet 73
- System Grounding 75
- System Grounding 76
- lug screw or 78
- Required Tools and Equipment 79
- Grounding the Chassis 80
- Grounding the Chassis 81
- Starting Up the Switch 82
- Starting Up the Switch 83
- DS-X9032 86
- 1/2 G FC Module 86
- Ejector levers flush with 90
- Statement 341 91
- Statement 1040 91
- Removing a Power Supply 92
- Installing a Power Supply 92
- PWR-845-AC 93
- Removing a Fan Module 95
- Installing a Fan Module 95
- MDS 9216i 98
- Connecting to the COM1 Port 100
- MGMT 10/100 101
- Class 1 laser product 102
- Latching sleeve retracted; 103
- Latching sleeve extended; 103
- Removing an X2 Transceiver 104
- Installing an X2 Transceiver 104
- Installing an SFP Transceiver 105
- Removing an SFP Transceiver 106
- SFP module 108
- Cabinet and Rack Installation 111
- Rack-Mounting Guidelines 114
- Required Equipment 115
- Technical Specifications 121
- Module Specifications 122
- Weight of Modules 123
- Power Specifications 124
- Power Specifications 125
- X2 Transceiver Specifications 126
- X2 Transceivers 127
- Transceivers 133
- Cisco CWDM SFP Transceivers 135
- Part Number Product Name 141
- Cable and Port Specifications 143
- Console Port 144
- COM1 Port 145
- COM1 Port Pinouts 146
- RJ-45 (both ends) 147
- MGMT 10/100 Ethernet Port 148
- MGMT 10/100 Ethernet Port 149
- Power Cords 150
- Jumper Power Cord 153
- Site Preparation Checklist 155
- Contact and Site Information 157
- Table D-4 Module Information 158
- Numerics 159
Relacionado con productos y manuales para Los conmutadores de red Cisco MDS 9200 Series
Los conmutadores de red Cisco DS-X9224-96K9= - Switching Module - Switch Guía de instalación
(50 paginas)
(50 paginas)
Los conmutadores de red Cisco 3524-PWR - Catalyst XL Enterprise Edition Switch Guía de instalación
(144 paginas)
(144 paginas)
Los conmutadores de red Cisco ONS 15530 Especificaciones
(148 paginas)
(148 paginas)
Los conmutadores de red Cisco WS-C1924-A - Catalyst 1900 24 Ports 10MB Switch Manual de usuario
(8 paginas)
(8 paginas)
(29 paginas)
(5 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.118 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales