Cisco 1600R Guía de instalación Pagina 68

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 88
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 67
Cisco 1600 Series Router Hardware Installation Guide
ISDN BRI Provisioning by Switch Type
B-4
5ESS Custom BRI For voice and data
(Use these values only if you have an ISDN telephone connected.)
Two B channels for voice or data.
Multipoint.
Terminal type = D.
Two directory numbers assigned by service provider.
Two service profile identifiers (SPIDs) required, assigned by service
provider.
MTERM = 2.
Number of call appearances = 1.
Display = No.
Ringing/idle call appearances = idle.
Autohold= no.
Onetouch = no.
Request delivery of calling line ID on Centrex lines.
Set speed for ISDN calls to 56 kbps outside local exchange.
Directory number 1 can hunt to directory number 2.
5ESS National ISDN
(NI-1) BRI
Terminal type = A.
Two B channels for voice and data.
Two directory numbers assigned by service provider.
Two SPIDs required; assigned by service provider.
Set speed for ISDN calls to 56 kbps outside local exchange.
Directory number 1 can hunt to directory number 2.
DMS-100 BRI
Two B channels for voice and data.
Two directory numbers assigned by service provider.
Two SPIDs required; assigned by service provider.
Functional signaling.
Dynamic terminal endpoint identifier (TEI) assignment.
Maximum number of keys = 64.
Release key = no, or key number = no.
Ringing indicator = no.
EKTS = no.
PVC = 2.
Request delivery of calling line ID on Centrex lines.
Set speed for ISDN calls to 56 kbps outside local exchange.
Directory number 1 can hunt to directory number 2.
Table B-2 ISDN Provisioning by Switch Type (Continued)
Switch Type Provisioning
Vista de pagina 67
1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 87 88

Comentarios a estos manuales

Sin comentarios