Cisco 1605R Guía de instalación Pagina 69

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 82
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 68
Connecting WAN and Voice Interface Cards to a Network 3-21
T1/FT1 WAN Interface Card LEDs
Figure 3-20 Connecting the T1/FT1 Card to the T1 Wall Jack
Step 4
Turn ON power to the router.
Step 5 Check that theCD LED goes on, which means that the card’s internal DSU/CSU
is communicating with the DSU/CSU at the T1 service provider’s central office.
T1/FT1 WAN Interface Card LEDs
The T1/FT1 card has three LEDs and a loopback button, which are shown in Figure 3-21
and described in Table 3-5.
SEE MANUAL
BEFORE
INSTALLATION
LP AL CD
LOOP
BACK
DSU
CSU
T1
T1 DSU/CSU
T1 port
(RJ-45)
Straight-through
RJ-45-to-RJ-45 cable
T1 (RJ-48C)
wall jack
H11203
Vista de pagina 68
1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 81 82

Comentarios a estos manuales

Sin comentarios