Cisco 1750 - 1750 Router Guía de instalación descargar pdf (Pagina 74)

Installing a Mini-Flash Module

viii

Cisco 1750 Router Hardware Installation Guide

78-6169-02

Figure 5 Installing a Mini-Flash Module

Follow these steps to install a mini-Flash memory module on the motherboard:

Note You need to remove the motherboard from the chassis to remove the

mini-Flash memory module.

Step 1 Locate the module slot on the motherboard, shown in Figure 2.

Step 2 Hold the module with the notched edge away from you.

Step 3 Insert the module into the module slot at a 45-degree angle, as shown in Figure 5.

Step 4 Press down firmly on the module until you hear a clicking sound and the module

is firmly seated in the slot.

Step 5 Turn the motherboard back to its original position (right-side up) and place it in

the chassis as before.

Mini-Flash module slot

45 degrees

Notched edge

22309

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 83 84

Sin comentarios

Cisco 1750 - 1750 Router Guía de instalación Pagina 74