Cisco 2504 - 2504 Router Manual de usuario descargar pdf (Pagina 18)

18 Replacing the Boot ROMs in the Cisco 2500 Series and AccessPro PC Card Routers

Replacing the Boot ROMs—All Models

Figure 18 Extracting and Inserting Boot PROMs

Step 3

Insert the new boot ROMs in their respective sockets so that the beveled edge of the ROM

chip is on the same side as the ﬂat corner on the ROM socket (see Figure 19), being careful

not to bend or crush any of the bottom pins. If you inadvertently bend a pin, use needle-nose

pliers to straighten it.

Caution Boot ROMs should be installed with the printed label side up. Installing boot ROMs with

the label side down will result in damage to the ROM.

Figure 19 Orienting Boot ROMs to the Socket

PLCC extractor tool

PLCC PROMPLCC extractor slot

PLCC socket

ueeze here

H1579a

PLCC extractor slot

Squeeze here

Beveled edge

on the boot ROM

lat corner on

oot ROM socket

ROM socket

Boot ROM

H3804

1 2 ... 13 14 15 16 17 18 19 20 21 22

Sin comentarios

Cisco 2504 - 2504 Router Manual de usuario Pagina 18