Cisco 2504 - 2504 Router Manual de usuario descargar pdf (Pagina 20)

20 Replacing the Boot ROMs in the Cisco 2500 Series and AccessPro PC Card Routers

Replacing the Cover or AccessPro PC Card

After replacing the boot ROM and resetting the boot ROM jumper (if necessary), replace the cover

or AccessPro PC card following the instructions in the appropriate section.

Replacing the Chassis Cover—Cisco 2501–2516 or 2520–2523

This section explains how to replace the chassis cover on the Cisco 2501–2516 or 2520–2522

models.

Note The Cisco 2517–2519 chassis are different from the other Cisco 2500 series models. To

replace the front cover on the Cisco 2517–2519 router/hubs, go to the section “Replacing the Front

Cover—Cisco 2517–2519 Router/Hubs,” later in this document.

Take the following steps to replace the chassis cover:

Step 1 Position the two chassis sections as shown in Figure 20.

Figure 20 Replacing the Chassis Cover

Step 2

Press the two chassis sections together, as shown in Figure 20, and ensure the following:

• The top section ﬁts ﬁrmly into the rear of the bottom section. (See Figure 20, Part A.)

• The bottom section ﬁts ﬁrmly into the front of the top section. (See Figure 20, Part B.)

• Both the top and bottom sections ﬁt ﬁrmly together. (See Figure 20, Part C.)

If You Have a Proceed With the Section On Page

Cisco 2501–2516 or

2520–2522

Replacing the Chassis Cover—Cisco 2501–2516 or 2520–2523 20

Cisco 2517–2519 Replacing the Front Cover—Cisco 2517–2519 Router/Hubs 21

AccessPro PC card Replacing the AccessPro PC Card 21

H1997

FrontRear Left end

toward you

Top section

Bottom section

1 2 ... 15 16 17 18 19 20 21 22

Sin comentarios

Cisco 2504 - 2504 Router Manual de usuario Pagina 20