Cisco 2511 - Router - EN Manual de usuario descargar pdf (Pagina 16)

Figure 2. IP addressing Topology diagram

Now assign interface Serial 0/1 of Router r1 the IP address as described below:

1. From the global configuration mode enter:

r1(config)# interface Serial0/1 enter configuration

mode

r1(config-if)# ip address 192.168.10.1 255.255.255.0 assign an

IP address and a

Class C subnet

mask to the

interface using its

IP address in Figure

1 topology.

2. To complete the interface configuration you need to activate the interface.

By default router interfaces are deactivated by manufacturer, left on the

shutdown state.

From interface configuration mode, enter

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Sin comentarios

Cisco 2511 - Router - EN Manual de usuario Pagina 16