Cisco 2650 - 2650 Router Especificaciones descargar pdf (Pagina 121)

5-21

Cisco IOS Telephony Service, Version 2.02

Chapter 5 Command Reference

date-format (telephony-service)

To set the date display format on all the Cisco IP phones attached to the router, use the date-format

command in telephony-service configuration mode. To disable the date display format, use the no form

of this command.

date-format {mm-dd-yy | dd-mm-yy}

no date-format {mm-dd-yy | dd-mm-yy}

Syntax Description

Defaults The default is set to mm-dd-yy.

Command Modes Telephony-service configuration

Command History

Examples The following example sets the date format on the Cisco IP phones to date, month, and year:

Router(config)# telephony-service

Router(config-telephony-service)# date-format dd-mm-yy

Related Commands

mm-dd-yy Set to month, day, and year. Each slot needs a two-digit number. This format

is the default setting.

dd-mm-yy Set to day, month, and year. Each slot needs a two-digit number.

Release Modification

12.2(2)XT This command was introduced on the following platforms: Cisco 1750,

Cisco 1751, Cisco 2600 series and Cisco 3600 series multiservice routers;

and Cisco IAD2420 series IADs.

12.2(8)T This command was integrated into Cisco IOS Release 12.2(8)T and

implemented on the Cisco 3725 and Cisco 3745 routers.

12.2(8)T1 This command was implemented on the Cisco 2600-XM and Cisco 2691

routers.

12.2(11)T This command was integrated into Cisco IOS Release 12.2(11)T and

implemented on the Cisco 1760 routers.

Command Description

telephony-service Enables Cisco IOS Telephony Service and enters telephony-service

configuration mode.

1 2 ... 116 117 118 119 120 121 122 123 124 125 126 ... 265 266

Sin comentarios

Cisco 2650 - 2650 Router Especificaciones Pagina 121