Cisco 2650 - 2650 Router Especificaciones descargar pdf (Pagina 147)

5-47

Cisco IOS Telephony Service, Version 2.02

Chapter 5 Command Reference

dialplan-pattern (telephony-service)

To create a global prefix that can be used to expand the abbreviated extension numbers into fully

qualified E.164 numbers, use the dialplan-pattern command in telephony-service configuration mode.

To disable, use the no form of this command.

dialplan-pattern tag pattern extension-length length [no-reg]

no dialplan-pattern tag [pattern extension-length length]

Syntax Description

Defaults No default behavior or values.

Command Modes Telephony-service configuration

Command History

Usage Guidelines Directory numbers for the Cisco IP phones are expected to be entered in extension number format. The

extension number should be greater or equal to the extension length. Otherwise, the extension number

cannot be converted to a qualified E.164 number. The dialplan-pattern command creates a global prefix

that can be used to expand the abbreviated extension numbers to fully qualified E.164 numbers. The

tag Dial-plan string tag used before a ten-digit telephone number. The tag

number is from 1 to 5.

pattern Dial-plan pattern, such as the area code, the prefix, and the first one or two

digits of the extension number.

extension-length The number of extension digits.

length The number of extension digits. The range is from 1 - 32.

no-reg (Optional) Prevents the E.164 numbers in the dial-peer from registering to

the gatekeeper.

Release Modification

12.1(5)YD This command was introduced on the following platforms:

Cisco 2600 series and Cisco 3600 series multiservice routers, and

Cisco IAD2420 series IADs.

12.2(2)XT This command was implemented on the Cisco 1750 and

Cisco 1751 multiservice routers.

12.2(8)T This command was integrated into Cisco IOS Release 12.2(8)T and

implemented on the Cisco 3725 and Cisco 3745 routers.

12.2(8)T1 This command was implemented on the Cisco 2600-XM and Cisco 2691

routers.

12.2(11)T This command was integrated into Cisco IOS Release 12.2(11)T and

implemented on the Cisco 1760 routers.

1 2 ... 142 143 144 145 146 147 148 149 150 151 152 ... 265 266

Sin comentarios

Cisco 2650 - 2650 Router Especificaciones Pagina 147