Cisco 2960-24LT-L - Catalyst Switch Manual de usuario descargar pdf (Pagina 9)

Data Sheet

Table 4. Connectors and LED Indicators

Connectors

Cisco Catalyst 2960-S with SFP+ based ports:

●

10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling

●

100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling

●

1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling

●

1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Category 5 UTP cabling

●

1000BASE-SX, -LX/LH, -ZX, -BX, -T,* -FX,* and coarse wavelength-division multiplexing (CWDM) SFP-based ports: LC fiber connectors

(single/multimode fiber)

●

10GBASE-LR, SR, LRM, CX1 SFP+ based ports

*The Catalyst 2960-S with SFP+ does not support the GLC-FE-100BX, GLC-FE-100FX, or GLC-FE-100LX.

Cisco Catalyst 2960-S and 2960 with SFP-based ports:

●

10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 UTP cabling

●

100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling

●

1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling

●

1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Category 5 UTP cabling

●

1000BASE-SX -LX/LH, -ZX, -BX, -T,* -FX,* and CWDM SFP-based ports: LC fiber connectors (single/multimode fiber)

●

100BASE-LX, -BX, -FX SFP-based ports: LC fiber connectors (single/multimode fiber)

*GLC-T and GLC-GE-100FX are not supported on the Catalyst 2960-8TC-S, 2960-8TC-L, or 2960G-8TC-L switches.

Cisco Catalyst 2960-S FlexStack stacking cables:

CAB-STK-E-0.5M FlexStack stacking cable with a 0.5m length

CAB-STK-E-1M FlexStack stacking cable with a 1.0m length

CAB-STK-E-3M FlexStack stacking cable with a 3.0m length

Cisco Catalyst 2960-S console cables:

CAB-CONSOLE-RJ45 Console cable 6 ft with RJ-45

CAB-CONSOLE-USB Console cable 6 ft with USB type A and mini-B connectors

●

Customers can provide power to a switch by using the internal power supply. The connector is located at the back of the switch. These

switches do not have a redundant-power-supply port.

●

The internal power supply is an auto-ranging unit

●

The internal power supply supports input voltages of between 100 and 240 VAC

●

Use the supplied AC power cord to connect the AC power connector to an AC power outlet.

●

Cisco RPS connector:

The Cisco RPS connector offers connection for an optional Cisco RPS 2300 that uses AC input and supplies DC output to the switch.

The connector offers a 2300W redundant power system that supports up to 6 external network devices and provides power to 2 failed devices

at a time.

The connector automatically senses when the internal power supply of a connected device fails and provides power to the failed device,

preventing loss of network traffic.

Only the Cisco RPS 2300 (model PWR-RPS2300) should be attached to the redundant-power-system receptacle.

Note: The Cisco Catalyst 2960-8TC-L and 2960G-8TC-L do not have RPS ports.

LED Indicators

●

Per-port status: Link integrity, disabled, activity, speed, and full duplex

●

System status: System, RPS, link status, link duplex, PoE, and link speed

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 20 21

Comentarios a estos manuales

Sin comentarios

Cisco 2960-24LT-L - Catalyst Switch Manual de usuario Pagina 9

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Cisco 2960-24LT-L - Catalyst Switch