Cisco 3745 Guía de instalación descargar pdf (Pagina 10)

Installing the Chassis

You can set the chassis on a desktop or install it in a rack. See the applicable instructions in the following sections:

• Rack-Mounting the Chassis, page 10

• Installing on a Desktop, page 11

Note Cisco 3745 routers are not designed for wall-mounting.

Rack-Mounting the Chassis

The standard accessory kit contains brackets for mounting the chassis in a 19-inch rack. You can order an optional accessory

kit with brackets and instructions for mounting the chassis in a 23- or 24-inch rack.

You can mount the chassis in the following ways:

• Front panel forward

• Rear panel forward

• Center mount with either front or rear panel forward

Attaching Brackets

Attach the mounting brackets to the chassis as shown in Figure 1, Figure 2, or Figure 3, using the screws provided in the bracket

kit. Attach the second bracket to the opposite side of the chassis. Use a number 2 Phillips screwdriver to install the bracket

screws.

Note Some 19-inch racks have power strips on the rear vertical rails that block cable access to power supplies. Be sure to

choose an orientation that provides unrestricted access to the rear panel.

Figure 1 Bracket Installation—Front Panel Forward

Cisco 3700

SERIES

63384

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

Sin comentarios

Cisco 3745 Guía de instalación Pagina 10