Cisco 4430 Manual de usuario descargar pdf (Pagina 9)

3-9

Cisco Content Routing Software Configuration Guide and Command Reference

78-12685-01

Chapter 3 Maintaining the Content Routing Software

Sample Configurations

boot device (flash,net) [ net]: flash

filename [ filename]:

cache IP address [ 10.1.138.5]:

IP network mask [ 255.255.255.0]:

server IP address [ 172.16.63.250]:

gateway IP address [ 10.1.138.1]:

protocol (rcp,ftp,tftp) [ ]:

username [ ]:

password [ ]:

flags [ 0]: 0x8000

[CE500 Series]:@

Step 3 Change the configuration flags field to 0x8000 (as shown above), and then enter @ to continue with the

boot sequence.

Note Setting the configuration flag field to 0x8000 lets you enter the system, bypassing all

security. Setting the configuration flag field to 0x4000 lets you bypass the NVRAM

configuration.

Step 4 Once you see the CLI prompt, set the password for the user using the user modify username name

password new-password command in global configuration mode.

Step 5 Use the write command to save the configuration change.

By default, the Content Router has an admin user with no password set. When no password is set, you

can enter anything as a password.

Sample Configurations

The following sample configurations are outputs of the show running-config command and can be used

as a guide for configuring the Content Router. If a feature is not enabled, it does not appear in the running

configuration display, though settings configured for that feature are displayed.

Direct Mode Sample Configuration

console# show running-config

Building configuration...

Current configuration:

logging event-export critical-events alert kernel

logging 10.7.8.9

group add admin gid 0

group add everyone gid 1000

user add admin uid 0 password 1 "ceSzbyeb" capability admin-access

user add des uid 5001 password 1 "bbdze9eSbS" capability telnet-access

hostname CR4430

1 2 3 4 5 6 7 8 9 10 11 12

Sin comentarios

Cisco 4430 Manual de usuario Pagina 9