Cisco 4500M Guía de instalación descargar pdf (Pagina 100)

4-102 Cisco 4000 Series Installation Guide

Network Connection Considerations

Multimode Power Budget Example

The following is an example multimode power budget, based on the following variables,

and calculated to ensure sufﬁcient power for transmission:

Length of multimode link = 3 kilometers (km)

4 connectors

3 splices

Higher order loss (HOL)

Clock recovery module (CRM)

Estimate the power budget as follows:

PB = 11.5 dB – 3 km (1.0 dB/km) – 4 (0.5 dB) – 3 (0.5 dB) – 0.5 dB (HOL) – 1 dB

(CRM)

PB = 11.5 dB – 3 dB – 2 dB – 1.5 dB – 0.5 dB – 1 dB

PB = 2.5 dB

The value of 2.5 dB indicates that this link would have sufﬁcient power for transmission.

Multimode Power Budget Example of Dispersion Limit

Following is an example with the same parameters as the previous example, but with a

multimode link distance of 4 km:

PB = 11.5 dB – 4 km (1.0 dB/km) – 4 (0.5 dB) – 3 (0.5 dB) – 0.5 dB (HOL) – 1 dB

(CRM)

PB = 11.5 dB – 4 dB – 2 dB – 1.5 dB – 0.5 dB – 1 dB

PB = 1.5 dB

The value of 1.5 dB indicates that this link would have sufﬁcient power for transmission.

But, due to the dispersion limit on the link (4 km x 155.52 MHz > 500 MHz/km), this link

would not work with multimode ﬁber. In this case, single-mode ﬁber would be the better

choice.

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 269 270

Sin comentarios

Cisco 4500M Guía de instalación Pagina 100