Cisco 804 - 804 Router Manual de usuario descargar pdf (Pagina 2)

Restrictions

Cisco IOS Release 12.0(4)T

Restrictions

This section describes the restrictions or limitations that apply to the outgoing SPID hunt feature.

The restrictions include the following:

• The outgoing SPID hunt command applies to U.S. switch types only.

• If you use the Calling Party Number feature, the calling party number associated with the call

you make may change depending on the SPID chosen for the voice call.

• If you always dedicate one channel to data and ﬁnd that you need Incoming Voice Call feature to

make a voice call, then it is recommended that you dedicate SPID2 for voice and SPID1 for data.

Supported Platforms

Cisco IOS Release 12.0(4)T is supported on these platforms:

• Cisco 801 router

• Cisco 802 router

• Cisco 803 router

• Cisco 804 router

Supported Standards, MIBs, and RFCs

None

Conﬁguration Tasks

This section describes setting up the outgoing SPID hunt feature in the Cisco 800 series routers.

• Setting up the automatic search of a free SPID to use for outgoing voice calls

• Verifying that the outgoing SPID hunt is enabled

Setting up Automatic Search of a Free SPID to Use For Outgoing

Voice Calls

The following tasks describe the conﬁguration steps for setting up outgoing SPID hunt.

This task applies to U.S. switching only.

Step Task Command

Step 1 Enter conﬁguration mode. conﬁgure terminal

Step 2 Disable or enable the automatic

search of a free SPID when a voice

call is made.

[no] POTS outgoing-hunt

1 2 3 4

Sin comentarios

Cisco 804 - 804 Router Manual de usuario Pagina 2