Cisco IE-3010-16S-8PC Guía de instalación descargar pdf (Pagina 22)

Cisco IE 3010 Switch Getting Started Guide

78-19582-02

Connecting the Switch Ports

10/100 or 10/100/1000 Ports

The 10/100 ports on the Cisco IE-3010-16S-8PC support Power over Ethernet

(PoE) and enhanced PoE (ePoE). See the switch software configuration guide for

more information.

Note The automatic medium-dependent interface crossover (auto-MDIX) feature is

enabled by default. The switch detects the required cable type for copper Ethernet

connections and configures the interfaces. You can use either a crossover or a

straight-through cable for connections to a copper 10/100/1000 module port on

the switch, regardless of the type of connected device.

Step 1

When you connect to servers, workstations,

IP phones, wireless access points, and routers,

use a straight-through, twisted four-pair,

Category 5 cable in a 10/100 or 10/100/1000

port. Use a crossover, twisted four-pair,

Category 5 cable when you connect to other

switches, hubs, or repeaters.

Step 2

Connect the other cable end to an RJ-45 port on the other device.

207184

1 2 ... 17 18 19 20 21 22 23 24 25 26

Sin comentarios

Cisco IE-3010-16S-8PC Guía de instalación Pagina 22