Cisco SCE 2000 4xGBE Especificaciones descargar pdf (Pagina 323)

100

101

2-287

Cisco SCE 2000 and SCE 1000 CLI Command Reference

OL-26797-03

Chapter 2 CLI Command Reference

service-bandwidth-prioritization-mode

Defines the service bandwidth prioritization mode.

service-bandwidth-prioritization-mode {global | subscriber-internal}

Syntax Description This command has no arguments.

Command Default default = subscriber-internal

Command Modes Interface Linecard Configuration

Command History This table includes the following release-specific history entries:

Usage Guidelines This parameter configures how bandwidth controllers compete for bandwidth by specifying which

assurance level (AL) value is used when allocating bandwidth between bandwidth controllers. The AL

can either be taken from either of the following:

• global prioritization mode — the global controller AL is taken from current bandwidth controller

Assurance Level.

• subscriber-internal prioritization mode — the global controller AL of each bandwidth controller

is taken from the Primary BWC Relative Priority (the party or “total” bandwidth-controller

Relative-Priority value)

Authorization: admin

Examples The following example shows how to use this command.

SCE>enable 10

Password:<cisco>

SCE#configure

SCE(config)#interface linecard 0

SCE(config if)#service-bandwidth-prioritization-mode global



SCE(config if)#

Related Commands

Release Modification

3.0.5 This command was introduced.

Command Description

show interface

linecard

service-bandwidth-pri

oritization-mode

Displays the currently configured service bandwidth prioritization mode.

1 2 ... 318 319 320 321 322 323 324 325 326 327 328 ... 603 604

Comentarios a estos manuales

Sin comentarios

Cisco SCE 2000 4xGBE Especificaciones Pagina 323

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Cisco SCE 2000 4xGBE