Cisco WS-C3550-24-FX-SMI - Catalyst 3550 100BASE-FX Switch Guía de instalación descargar pdf (Pagina 55)

2-15

Catalyst 3550 Multilayer Switch Hardware Installation Guide

78-11358-06

Chapter 2 Product Overview

Rear-Panel Description

Figure 2-9 Switch Rear Panel

AC Power Connector

For AC-powered switches, the internal power supply is an autoranging unit that

supports input voltages between 100 and 240 VAC.

For the Catalyst 2440-24-DC power information, see Appendix C, “DC Power

Connections.”

Cisco RPS Connector

For protection against a power supply failure, you can connect a Cisco RPS to the

switch. The Cisco RPS can support six external network devices and provide

power to one failed device at a time. It automatically senses when the internal

power supply of a connected device fails and provides power to the failed device,

preventing loss of network traffic.

The Cisco RPS 300 has two output levels: –48 V and 12 V with a total maximum

output power of 300 W. The Cisco RPS 675 has two output levels: –48 V and

12 V with a total maximum output power of 675 W.

1 RPS connector 3 Console port

2 AC power connector 4 Fan exhaust

100-240V~

5-3A

50/60Hz

DC OUTPUT 1

CONSOLE

101604

1 2 3

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 175 176

Sin comentarios

Cisco WS-C3550-24-FX-SMI - Catalyst 3550 100BASE-FX Switch Guía de instalación Pagina 55