Cisco GRP Manual de usuario descargar pdf (Pagina 29)

Matching Destination Patterns

Dialed Digits Destination Pattern Dialed Digits Collected

5550124 5…… 5550124

5550124 555…. 5550124

5550124 555 555

5550124 555T 5550124

In the first row of the table, the destination pattern specifies a seven-digit string. The first digit

must be a five, and the remaining six digits can be any valid digits. All seven digits must be

entered before the destination pattern is matched.

In the second row, the destination pattern specifies a seven-digit string. The first three digits

must be 555, and the remaining four digits can be any valid digits. All seven digits must be

entered before the destination pattern is matched.

In the third row, the destination pattern specifies a three-digit string. The dialed digits must be

exactly 555. When the user begins to dial the seven-digit number, the destination pattern

matches after the first three digits are entered. The router then stops collecting digits and places

the call. If the call is set up quickly, the answering party at the other end may hear the

remaining four digits as the user finishes dialing the string. After a call is set up, any dual tone

multifrequency (DTMF) tones are sent through the voice path and played out at the other end.

In the last row, the destination pattern specifies a variable-length digit string that is at least

three digits long. The first three digits must be exactly 555, and the remaining digits can be any

valid digits. The “T” tells the router to continue collecting digits until the interdigit timer

expires. The router stops collecting digits when the timer expires, or when the user presses the

pound (#) key.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 35 36

Sin comentarios

Cisco GRP Manual de usuario Pagina 29