Cisco RSP7000 Manual de usuario descargar pdf (Pagina 15)

Command Reference

PA-E3 and PA-2E3 Serial Port Adapter 15

mxt_ds=0x608BA654, rx ring entries=128, tx ring entries=256

rxring=0x4B01F480, rxr shadow=0x6081081C, rx_head=26

txring=0x4B01F960, txr shadow=0x60810E48, tx_head=192, tx_tail=192, tx_count=0

throttled=0, enabled=0, disabled=0

rx_no_eop_err=0, rx_no_stp_err=0, rx_no_eop_stp_err=0

rx_no_buf=0, rx_soft_overrun_err=0, dump_err= 1

tx_underrun_err=0, tx_soft_underrun_err=0, tx_limited=0

tx_fullring=0, tx_started=11504

Framing is g751, Clock Source is Line, Bandwidth limit is 34010.

Scrambling is enabled

National Bit is 0, Internaltional Bits are: 0 0

DSU mode 1

Data in current interval (213 seconds elapsed):

0 Line Code Violations, 0 P-bit Coding Violation

0 C-bit Coding Violation

0 P-bit Err Secs, 0 P-bit Severely Err Secs

0 Severely Err Framing Secs, 0 Unavailable Secs

0 Line Errored Secs, 0 C-bit Errored Secs, 0 C-bit Severely Errored Secs

Total Data (last 24 hours)

0 Line Code Violations, 0 P-bit Coding Violation,

0 C-bit Coding Violation,

0 P-bit Err Secs, 0 P-bit Severely Err Secs,

0 Severely Err Framing Secs, 0 Unavailable Secs,

0 Line Errored Secs, 0 C-bit Errored Secs, 0 C-bit Severely Errored Secs

No alarms detected.

PIO A: 639, PIO B: 303, Gapper register: 50DE

Framer register information:

reg 0: E0 reg 1: 0 reg 2: 0 reg 3: 0

reg 4: 0 reg 5: 8 reg 6: 0 reg 7: 0

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Sin comentarios

Cisco RSP7000 Manual de usuario Pagina 15