
Table 3 Cisco AS5400 System Data
Feature Benefit
Processor Type • 250-MHz RM7000 RISC processor
Demonstrated Speed • 50,000 packet-per-second fast switching
Memory • 256-512-MB SDRAM
• 64-128-MB Shared I/O
• 8-16-MB Boot Flash
• 32-64-MB System Flash
• 2-MB Level 3 Cache
Maximum Supported Calls • 648 modem calls or 248 ISDN calls (CT3)
• 480 modem or ISDN calls (E1)
• 384 modem or ISDN calls (T1)
DFC Slots • Seven slots
DFC Trunk Cards • CT3 DFC
• Eight T1/E1/PRI DFC
DFC DSP Card • 108-modem DFC
Egress Ports • Two 10/100-MB Ethernet ports
• Two 8-MB serial ports
• T1, E1, or CT3 DS1 trunks
Modem Protocols Supported • V.90 standard supporting rates of 56000 to 28000 in 1333-bps increments
• Fax out (transmission) Group 3, standards EIA 2388 Class 2 and EIA 592 Class 2.0, at modulations V.33, V.17, V.29, V.27ter, and V.21
• K56Flex at 56000 to 32000 in 2000-bps increments
• ITU-T V.34 Annex 12 at 33600 and 31200 bps
• ITU-T V.34 at 28800, 26400, 24000, 21600, 19200, 16800, 14400, 12000, 9600, 7200, 4800, or 2400 bps
• V.32bis 14400, 12000, 9600, 7200, 4800; V.32 9600, 4800; V.22bis 2400, 1200; V.21 300; Bell 103, 300; V.22 1200; V.23 1200/75
• ITU-T V.42 (including MNP 2-4 and LAPM) error correction
• ITU-T V.42bis (1K nodes) and MNP 5 data compression
• Async mode PPP
ISDN Protocols Supported • Sync mode PPP
• V.120
• V.110 at rates up to 38400 bps
• Network-side ISDN
• User-side ISDN
Wireless Protocols Supported • V.110
• MNP10EC
Console and Auxiliary Ports • Asynchronous serial (RJ-45)
Power-Supply Options • Dual redundant internal AC power supply
• Dual redundant internal DC power supply
Comentarios a estos manuales