Cisco UCS B440 M2 Manual de usuario descargar pdf (Pagina 41)

Cisco UCS 5108 Blade Server Chassis

SUPPLEMENTAL MATERIAL

SFP+ Transceivers

Each Cisco Fabric Extender within the chassis supports Small Form-Factor Pluggable (SFP+) copper or

optical transceivers. Each transceiver runs at 10 Gbs.

Copper SFP+ Twinax Transceivers

The Cisco Fabric Extenders support Twinax copper transceivers with twinax cables of various lengths. The

assembly consists of two transceivers connected by a twinax copper cable. The enhanced SFP+ 10-Gb

Ethernet transceiver is a bidirectional device with a transmitter and receiver in the same physical package.

It has a 20-pin connector on the electrical interface.

Figure 25 shows the SFP-H10GB-CU5M transceiver. The rubber loop is used for removing the SFP+ from its

port on the I/O module.

Figure 25 SFP+ 10 Gb Twinax Copper Transceiver

187492

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 47 48

Sin comentarios

Cisco UCS B440 M2 Manual de usuario Pagina 41