Cisco UCS C460 Manual de usuario descargar pdf (Pagina 20)

Cisco UCS C460 M2 High-Performance Rack-Mount Server

CONFIGURING the SERVER

STEP 5 CHOOSE RAID CONFIGURATION

The C460 M2 server accommodates either an LSI MegaRAID SAS 9260-8i or LSI MegaRAID SAS

9240-8i RAID controller. The C460 M2 contains a drive bay housing up to 12 HDDs or SSDs.

Cisco can provide factory-configured RAID 0, 1, 5, 6, and 10 systems depending on the RAID

implementation chosen, the RAID controller chosen, and the number of drives ordered.

Factory-configured RAID options are listed at the end of

Table 7. Note that RAID levels 50 and

60 are supported on the 9260-8i, but are not factory configurable.

Choose RAID Options

Choose one RAID controller, one RAID configuration option, and, if desired, the battery backup

option listed in

Table 7.

Table 7 Available RAID Options

Product ID (PID) PID Description

RAID Controllers

RC460-PL001 LSI MegaRAID SAS 9260-8i (RAID 0, 1, 5, 6, 10, 50, 60 supported)

■ Plugs into the dedicated SAS riser on the rear of the server on the left (see

Figure 4 on page 6).

■ Supports from 1 to 12 internal SAS or SATA drives

■ Battery backup option available (see the battery backup PID section in this

table)

■ Factory-configured RAID options: RAID 0, 1, 5, 6, 10 (see the RAID PIDs

section in this table)

RC460-PL002 LSI MegaRAID SAS 9240-8i (RAID 0 and 1)

■ Plugs into the dedicated SAS riser on the rear of the server on the left (see

Figure 4 on page 6).

■ Supports from 1 to 8 internal SAS or SATA drives

■ Battery backup option not available

■ Factory-configured RAID options: RAID 0 and 1 (see the RAID PIDs section in

this table)

RAID Battery Backup Option

R2XX-LBBU2 Battery Backup (for LSI MegaRAID SAS 9260-8i controller only)

RAID Configuration

R2XX-RAID0 Factory pre-configured RAID striping option

Enable RAID 0 Setting. Requires a minimum of 1 hard drive.

R2XX-RAID1 Factory pre-configured RAID mirroring option

Enable RAID 1 Setting. Requires exactly 2 drives, with same size, speed, capacity.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 53 54

Sin comentarios

Cisco UCS C460 Manual de usuario Pagina 20