
9
Release Notes for the Catalyst 3750 Switch Cisco IOS Release 12.1(14)EA1
OL-4215-01
Installation Notes
Caution Do not connect the switch to any device other than the PC or workstation being used to configure it.
Figure 2 Connecting the Switch and PC or Workstation Ethernet Ports
Step 5 Connect the other end of the cable to the Ethernet port on the PC or workstation.
Verify that the port status LED on the switch Ethernet port is green.
Step 6 Wait approximately 30 seconds after the port LED turns green, and launch a web browser on your PC or
workstation.
Step 7 Enter the IP address 10.0.0.1 in the browser, as shown in Figure 3, and press Enter.
Figure 3 Entering the IP Address
The Express Setup home page appears, as shown in Figure 4.
1 Switch 3 PC or workstation
2 Ethernet cable
9
1
100Base-FXSFP
1x
2x
3x
4x
5x
6x
7x
8x
Catalyst 2940
SERIES
SYST
STAT
DPLX
SPD
MODE
1
89491
3
2
Comentarios a estos manuales