
2-17
Cisco XR 12000 Series Router SIP and SPA Hardware Installation Guide
OL-17438-04
Chapter 2 Overview: Cisco XR 12000 Series Router Shared Port Adapters
2-Port Gigabit Ethernet SPA Overview
2-Port Gigabit Ethernet SPA Overview
The following sections describe the version 1 and version 2 of the 2-Port Gigabit Ethernet SPA:
• 2-Port Gigabit Ethernet SPA LEDs, page 2-17
• 2-Port Gigabit Ethernet SPA (Version 2) LEDs, page 2-18
• SFP Module Cabling and Connection Equipment, page 2-21
2-Port Gigabit Ethernet SPA LEDs
The 2-Port Gigabit Ethernet SPA has two types of LEDs: an A/L LED for each port and a STATUS LED,
as shown in
Figure 2-12.
Figure 2-12 2-Port Gigabit Ethernet SPA Faceplate
Table 2-14 describes the 2-Port Gigabit Ethernet SPA LEDs.
1 A/L (Active/Link) LED 2 STATUS LED
STATUS
0
1
A/L
A/L
SPA-2X1GE
0
1
A/L
A/L
138041
2
1 3
Ta bl e 2-14 2-Port Gigabit Ethernet SPA LEDs
LED Label Color State Meaning
A/L Off Off Port is not enabled.
Green On Port is enabled and the link is up.
Amber On Port is enabled and the link is down.
STATUS Off Off SPA power is off.
Green On SPA is ready and operational.
Amber On SPA power is on and good, and SPA is being configured.
Comentarios a estos manuales