Cisco XR 12404 Manual de usuario Pagina 41

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 178
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 40
1-27
Cisco XR 12404 Router Installation Guide
OL-13830-02
Chapter 1 Cisco XR 12404 Router Overview
Fan Tray Assembly
The fan tray assembly is a sheet metal enclosure containing 7 fans and 2 fan
controller cards (Figure 1-14).
Warning
Exhaust from other equipment vented directly into the Cisco XR 12404 router air
inlet can cause an over-heat condition. Install the router so that it is protected
from a direct flow of hot air from other equipment.
Figure 1-14 Fan Tray Assembly
The fan tray assembly draws room air in through the air filter, across the card cage
and out through exhaust vents located on the side of the chassis.
Note Warm air exits at the side of the chassis. Allow sufficient air flow by maintaining
6 inches (15.24 CM) of clearance at both the inlet and exhaust openings on the
chassis.
A fan tray assembly controller card monitors the operation of the 7 fans.
66250
todd.book Page 27 Monday, March 16, 2009 2:47 PM
Vista de pagina 40
1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 177 178

Comentarios a estos manuales

Sin comentarios