Cisco XR 12410 Manual de usuario descargar pdf (Pagina 34)

Chapter 1 Product Overview

Line Card and Route Processor Overview

1-20

Cisco XR 12410 and Cisco XR 12810 Router Installation Guide

OL-17441-01

PRP Auxiliary and Console Ports

The auxiliary and console ports on the PRP are EIA/TIA-232 (also known as

RS-232) asynchronous serial ports. These ports connect external devices to

monitor and manage the system.

• The auxiliary port—A (male) plug that provides a data terminal equipment

(DTE) interface. The auxiliary port supports flow control and is often used to

connect a modem, a channel service unit (CSU), or other optional equipment

for Telnet management.

• The console port—A (female) receptacle that provides a data

circuit-terminating equipment (DCE) interface for connecting a console

terminal.

PRP-3 LEDs

The PRP-3 has the following LED indicators:

• Two Ethernet port LEDs used in conjunction with each of the three RJ-45

Ethernet connectors:

–

LINK—Indicates link activity

–

DATA—Indicates data transmission or reception

• Two BITS port LEDs used in conjunction with each of the two BITS ports:

–

SIG—Indicates carrier signal available

–

ACT—Indicates that the interface is active

Note BITS feature is not supported in Release 3.8.0.

• One auxiliary port (AUX) and one console port (CONSOLE) LED:

–

AUX—Used as a backup for the command outputs on the Console.

–

CONSOLE—Used for configuring the router by connecting an RJ-45

cable to the console terminal. The router can be configured through the

console terminal.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 237 238

Sin comentarios

Cisco XR 12410 Manual de usuario Pagina 34