Cisco 1600R Guía de instalación descargar pdf (Pagina 39)

Optional Installations 3-3

Installing the WAN Interface Card in the Router

Follow these steps to install the card in a Cisco 1600 series router:

Step 1 Turn the router OFF, and disconnect the cable from the socket labeled 14 VDC

on the rear panel of the router.

Step 2 Loosen the captive screws on the WAN interface card-slot cover on the rear

panel of the router (Figure 3-1).

Figure 3-1 Removing the Slot Cover (Cisco 1601 Shown)

Step 3

Remove the metal plate that covers the WAN interface card slot.

Step 4 Hold the WAN interface card by the front panel, and line up the edges of the card

with the guides (Figure 3-2).

DO NOT INSTALL ANY WAN

MODULE WITH POWER ON

H7179

WAN interface card slot cover

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 87 88

Sin comentarios

Cisco 1600R Guía de instalación Pagina 39