Cisco 2505 Especificaciones descargar pdf (Pagina 13)

Installing the Hardware 2-7

Rack-Mounting the Chassis

Installing in a Rack

After the brackets are secured to the chassis, you can rack-mount the chassis. Using the

screws you provide, attach the chassis to the rack as shown in Figure 2-10 or Figure 2-11.

Figure 2-10 Attaching the Chassis to the 19-Inch Rack—Rear Panel Forward

Figure 2-11 Attaching the Chassis to the 24-Inch Rack—Rear Panel Forward

Caution

If you plan to place the router on a desk or table, do not place anything on top of

the router that weighs in excess of 10 pounds (4.5 kg). Excessive weight on top could

damage the chassis.

Input: 100-240VAC

Freq: 50.60 Hz

Current: 1.2-0.6A

Watts: 40W

H1719

Note: The second bracket attaches to the

rack at the other side of the chassis.

The brackets can also be installed

with the front panel forward.

Input: 100-240VAC

Freq: 50.60 Hz

Current: 1.2-0.6A

Watts: 40W

H3892

Note: The second bracket attaches to the

rack at the other side of the chassis.

The brackets can also be installed

with the front panel forward.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 57 58

Sin comentarios

Cisco 2505 Especificaciones Pagina 13