Cisco 2514 - Router - EN Manual de usuario descargar pdf (Pagina 6)

CONFIGURATION OF PCS AND ROUTERS - PAGE 6

• Installing packages: Then a window with label “Processing”, shows the

progress of setting up the RPM files. A window, labeled Package Installation,

shows the progress of the installation of the selected packages. Disc 2 and

Disc 3 are needed during the package installation process. The time of the

installation is approximately 90 minutes.

• When the installation is complete, you will be asked if you want to create a

bootdisk. Proceed to Step 9.

Step 9: Creating a Bootdisk.

We strongly recommend to create a bootdisk. When the operating system fails to

boot after changing some configuration files, the bootdisk, can be used to start the

system, and correct any settings.

• In the Boot disk dialog box, choose "Yes".

• Insert a blank floppy into the floppy drive. Press "OK".

Step 10: Configuring the Monitor and X Windows.

• In the Video Card Configuration dialog box, press "OK".

• Next, determine the monitor configuration parameters, such as the type of

monitor and the horizontal and vertical synchronization rates.

• In the displayed Monitor Configuration dialog box, the monitor will display the type

and the parameters of the monitor detected by the system. Press "Yes" if this is

correct.

• You can choose "Change" to modify the configuration of the monitor manually.

Note, however, that settings which do not match your monitor may damage

the monitor.

• Next, the system shows the X Customization dialog box, which is used to

configure the X Windows setting. The system displays the default parameters,

such as the color depth (e.g., High Color, True Color), resolution (e.g., 1024x768),

and the default login (e.g., Graphical, Text).

• The recommended settings are: color depth=True Color, resolution=1024x768,

and default login=Graphical.

• You can choose "Change" to modify the configuration of X windows. Press "OK"

if the configuration is completed.

Step 11: Completing the Installation.

• Next, a dialog box, labeled Complete, is displayed. Pressing "OK" completes the

installation process, and the PC reboots automatically.

1 2 3 4 5 6 7 8 9 10 11

Sin comentarios

Cisco 2514 - Router - EN Manual de usuario Pagina 6