Cisco 2811-AC-IP - 2811 Integrated Services Router Manual de usuario descargar pdf (Pagina 6)

JC; Reviewed:

SPOC 9/25/2007

Solution & Interoperability Test Lab Application Notes

6 of 8

Cisco2811-POE

The power inline of each port is set to auto by default. The command show power inline will

display the inline power configuration and status.

To change the power mode, access the port interface and then use the command power inline

<auto|never|static>. The mode should be set to auto for Avaya IP Telephones to work.

Switch#config t

Switch(config)#interface fastethernet 1/0/5

Switch(config-if)#power inline ?

auto Automatically detect and power inline devices

never Never apply inline power

static High priority inline power interface

Switch(config-if)#

Switch>show power inline

Module Available Used Remaining

(Watts) (Watts) (Watts)

------ --------- -------- ---------

1 160.0 137.2 22.8

Interface Admin Oper Power Device Class Max

(Watts)

--------- ------ ---------- ------- --------- ----- ----

Fa1/0/1 auto on 7.0 Ieee PD 2 7.0

Fa1/0/2 auto on 7.0 Ieee PD 2 7.0

Fa1/0/3 auto on 15.4 Ieee PD 3 15.4

Fa1/0/4 auto on 7.0 Ieee PD 2 7.0

Fa1/0/5 auto on 15.4 Ieee PD 0 15.4

Fa1/0/6 auto on 15.4 Ieee PD 3 15.4

Fa1/0/7 auto on 7.0 Ieee PD 2 7.0

Fa1/0/8 auto on 7.0 Ieee PD 2 7.0

Fa1/0/9 auto on 7.0 Ieee PD 2 7.0

Fa1/0/10 auto on 7.0 Ieee PD 2 7.0

Fa1/0/11 auto on 7.0 Ieee PD 2 7.0

Fa1/0/12 auto on 7.0 Ieee PD 2 7.0

Fa1/0/13 auto on 7.0 Ieee PD 2 7.0

Fa1/0/14 auto on 7.0 Ieee PD 2 7.0

Fa1/0/15 auto on 7.0 Ieee PD 2 7.0

Fa1/0/16 auto on 7.0 Ieee PD 2 7.0

Switch>

1 2 3 4 5 6 7 8

Sin comentarios

Cisco 2811-AC-IP - 2811 Integrated Services Router Manual de usuario Pagina 6