Cisco 3620 Especificaciones descargar pdf (Pagina 13)

Cisco 3600 Series Power Supply Configuration Note 13

Removing the Power Supply

Figure 11 Removing Cisco 3640 Power Connector

Step 3

Find the two small two-pin connectors used to power the fans. Grasp the two halves of

each connector ﬁrmly and pull them apart. (See Figure 8 and Figure 9.)

Note If cable tie-wraps on the harness interfere with removing the connectors, cut the

tie-wraps, being careful not to cut into the power cables.

Step 4 The Cisco 3620 power supply is held in the chassis by one external mounting screw at the

rear of the router. (See Figure 12.) The Cisco 3640 power supply is held by two mounting

screws. (See Figure 13.) Remove the screw or screws and set them aside.

Step 5 Slide the power supply forward slightly in the chassis. This disengages the hooks built

into the chassis that help secure the power supply. The Cisco 3620 router has two hooks.

(See Figure 14.) The Cisco 3640 router has one hook. (See Figure 15.)

Step 6 Lift the power supply out of the chassis.

H8684

Eight-pin

connector

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 21 22

Sin comentarios

Cisco 3620 Especificaciones Pagina 13