Cisco 7300-6T3 Especificaciones descargar pdf (Pagina 23)

1-11

OC12 Packet Over SONET Line Card Installation and Configuration

OL-3437-01

Chapter 1 Overview

Identifying Interface Addresses

Cisco 7304 Router Interface Addresses

This section describes how to identify the interface addresses used for the OC12 POS line card in a

Cisco 7304 router. The interface address is composed of a two-part number in the format

slot-number/interface-port-number. See Table 1-4 for the interface address format.

In a Cisco 7304 router, slots are numbered, beginning with slot 0 (a dual-width slot reserved for the

NSE-100) on the bottom, and continuing from the lower left to the upper right through slot 5.

Note The NSE-100 is the only card supported in slot 0.

The interface address of the interface on an OC12 POS line card in slot 2 is 2/0 (slot 2 and interface 0).

If the OC12 POS line card was in slot 4, this same interface would be numbered 4/0 (slot 4 and

interface 0).

Table 1-4 Identifying Interface Addresses

Platform Interface Address Format Numbers Syntax

Cisco 7304 router Slot-number/interface-port-number Slot—0 through 5

1. Slot 0 and slot 1 are reserved for the network services engine (NSE).

2/0

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 49 50

Sin comentarios

Cisco 7300-6T3 Especificaciones Pagina 23