Cisco ATA-186 Guía de usuario descargar pdf (Pagina 11)

Cisco ATA 186 Configuration Guide

2. Access the TFTP URL menu by pressing 905# on the telephone

keypad.

You will hear a voice prompt that says, “Enter alphanumeric value.”

3. Enter ata186.net2phone.com by pressing the corresponding telephone

keys in the following manner:

• To enter the “a,” press the 2 key twice, followed by the pound

(#) key.

NOTE: Each time you press a key, the voice announces the

character corresponding with the amount of times you

pressed the key. The character is not entered until you

press the pound (#) key; if you hear the wrong character,

keep pressing the key until the correct character is

announced.

Go slowly, listen to make sure you are entering the correct

character, and press pound (#) after each character to

enter the value.

• To enter the “t,” press the 8 key twice, followed by the pound

(#) key.

• To enter the “a,” press the 2 key twice, followed by the pound

(#) key.

• To enter the “1,” press the 1 key, followed by the pound (#)

key.

• To enter the “8,” press the 8 key, followed by the pound (#)

key.

• To enter the “6,” press the 6 key, followed by the pound (#)

key.

• To enter the dot, press the 1 key twice, followed by the pound

(#) key.

• To enter the “n,” press the 6 key three times, followed by the

pound (#) key.

• To enter the “e,” press the 3 key three times, followed by the

pound (#) key.

• To enter the “t,” press the 8 key twice, followed by the pound

(#) key.

• To enter the “2,” press the 2 key once, followed by the pound

(#) key.

• To enter the “p,” press the 7 key twice, followed by the pound

(#) key.

• To enter the “h,” press the 4 key three times, followed by the

pound (#) key.

Page 8

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 22 23

Sin comentarios

Cisco ATA-186 Guía de usuario Pagina 11