Cisco Catalyst 4224 Manual de usuario descargar pdf (Pagina 18)

WJR; Reviewed:

WCH 9/17/2003

Solution & Interoperability Test Lab Application Notes

18 of 26

ipo-callmanager.doc

4.6. Configuring a Cisco IP Phone

Step 1 Connect the Cisco IP phone to the Catalyst 4224 port with in-line powering

enabled, as shown in Section 5, or with a local power supply.

• Press “**#” to unlock the configuration.

• Press Settings and then Network Configuration. Press Select.

• Set the values as shown in Table 2.

Setting Value

DHCP Enabled

IP Address

192.16.50.110

Subnet Mask

255.255.255.0

TFTP Server 1

192.16.50.171

Default Router 1

192.16.50.71

CallManager 1

192.16.50.171

Admin. Vlan ID

Table 2: Cisco IP Phone Settings

• Save the settings and exit to the default screen.

Step 2 At the Call Manager Main Menu, select Device-Phone and press Find to list the

system phones.

• Select the phone whose device name or IP address matches the phone that was added.

• Configure the phone as shown in Figure 18. Set the Calling Search Space to the

General Calling Search Space that was created in Section 4.3 which includes the IP

Office Partition.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24 25 26

Sin comentarios

Cisco Catalyst 4224 Manual de usuario Pagina 18