
WJR; Reviewed:
WCH 9/17/2003
Solution & Interoperability Test Lab Application Notes
©2003 Avaya Inc. All Rights Reserved.
23 of 26
ipo-callmanager.doc
5. Configuring the Cisco Catalyst 4224
Table 3 shows the Cisco Catalyst 4224 configuration, abbreviated to focus on the most relevant
items for these Application Notes.
Configuration Comments
interface FastEthernet5/1
description trunktoipoffice
no ip address
duplex auto
speed auto
switchport trunk native vlan 200
switchport mode trunk
!
i
interface FastEthernet5/9
description callmanager
no ip address
duplex auto
speed auto
switchport access vlan 50
!
interface FastEthernet5/10
description ciscophone20000
no ip address
duplex auto
speed auto
switchport mode trunk
switchport voice vlan 50
!
!
interface Vlan 50
ip address 192.16.50.71 255.255.255.0
ip mroute-cache
!
interface Vlan 200
ip address 192.16.200.71 255.255.255.0
ip mroute-cache
h323-gateway voip bind srcaddr
192.16.200.71
!
ip classless
no ip route static inter-vrf
no ip http server
!
FastEthernet port 5/1 is the trunk to
the P333T-PWR (VLAN 200). As a
trunk, the packets passed are tagged
with the VLAN identifier and a
priority marking.
FastEthernet 5/9 is the Call Manager
port. The port is assigned to the “call
manager VLAN” (VLAN 50).
FastEthernet 5/10 is for the Cisco IP
phone. In-line power is supplied by
default. The port and phone are
configured for tagged packets and for
the “voice” VLAN as 50.
VLAN 50 is established as the Call
Manager VLAN with an interface to
the router at 192.16.50.71
VLAN 200 is the IP Office VLAN
with an interface to the router at
192.16.200.71
Table 3: Cisco Catalyst Configuration
Comentarios a estos manuales