Cisco Catalyst 4224 Manual de usuario Pagina 24

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 26
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 23
WJR; Reviewed:
WCH 9/17/2003
Solution & Interoperability Test Lab Application Notes
©2003 Avaya Inc. All Rights Reserved.
24 of 26
ipo-callmanager.doc
6. Configuring the Avaya P333T-PWR
Table 4 shows the Avaya Cajun P333T-PWR configuration, abbreviated to focus on the most
relevant items for these notes. The key steps are in bold.
Configuration Steps Comments
set port negotiation 1/1 enable
set port flowcontrol all 1/1 off
set port level 1/1 7
set trunk 1/1 off
set port vlan 200 1/1
set port name 1/1 "ipphone"
set port trap 1/1 enable
set port classification 1/1 regular
set port enable 1/1
set port powerinline 1/1 1
set port powerinline priority 1/1 2
set port negotiation 1/5 enable
set port flowcontrol all 1/5 off
set port level 1/5 5
set trunk 1/5 off
set port vlan 200 1/5
set port name 1/5 "ManagementPC"
set port trap 1/5 enable
set port classification 1/5 regular
set port enable 1/5
set port powerinline 1/5 1
set port powerinline priority 1/5 3
set port negotiation 1/12 enable
set port flowcontrol all 1/12 off
set port level 1/12 0
set trunk 1/12 dot1q
set port vlan 200 1/12
set port name 1/12 "cisco4224"
set port trap 1/12 enable
set port classification 1/12 regular
set port enable 1/12
set port powerinline 1/12 1
set port powerinline priority 1/12 3
set port disable 1/24
set port negotiation 1/24 enable
set port flowcontrol all 1/24 off
set port level 1/24 7
set trunk 1/24 off
set port vlan 200 1/24
set port name 1/24 "ipoffice"
set port trap 1/24 enable
Port 1 is the Avaya 4612 IP Phone. Set the
layer 2 priority level to 7, the highest level.
Set the port to be a member of the IP Office
VLAN (VLAN 200).
Set the port to be enabled.
Set the Management PC port to be a member
of VLAN 200.
Set the Cisco 4224 802.1Q trunk port to use
VLAN tagging via the 802.1Q protocol. Set the
port to be a member of VLAN 200.
Set the IP Office 406 Server port to the highest
priority level (7). Assign the port to VLAN
200.
Vista de pagina 23
1 2 ... 19 20 21 22 23 24 25 26

Comentarios a estos manuales

Sin comentarios