Cisco PA-E3 Especificaciones Pagina 19

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 68
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 18
CHAPTER
VIP2 and the PA-E3 3-1
3
VIP2 and the PA-E3
This chapter provides information on the PA-E3 serial port adapter and its use on the VIP2 in
Cisco 7000 series and Cisco 7500 series routers. This chapter contains the following sections:
Overview, page 3-1
Removing a Port Adapter, page 3-4
Installing a Port Adapter, page 3-5
Overview
The PA-E3 is used on the VIP2 in Cisco 7000 series and Cisco 7500 series routers and can be
installed in either port adapter slot 0 or slot 1 on the VIP2 motherboard.
Note You can have up to three E3 serial interfaces on a VIP2 motherboard. Cisco recommends a
configuration of one PA-E3 (with one E3 serial interface) and one PA-2E3 (with two serial
interfaces) for a total of three E3 serial interfaces per VIP2.
Figure 3-1 shows two one-port PA-E3 port adapters installed in port adapter slot 0 and slot 1, on a
VIP2-15 or VIP2-40.
Vista de pagina 18
1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 67 68

Comentarios a estos manuales

Sin comentarios