Cisco SOHO 91 Guía de instalación descargar pdf (Pagina 12)

1-12

Cisco 831 and SOHO 91 Router Cabling and Setup Quick Start Guide

78-14783-05

Chapter 1 Cisco 831 Router and Cisco SOHO 91 Router Cabling and Setup Quick Start Guide

Start the CRWS Software (CRWS Users)

If You Cannot Connect to a Website

If you cannot connect to the Internet using the factory configuration, or if you have loaded new

Cisco IOS software on the router since you installed it, you can configure the router by using the Cisco

Router Web Setup (CRWS) software, or by using Security Device Manager (SDM) software, if you

specified SDM be installed when you ordered the router. Either CRWS or SDM is already loaded on the

router and is run from a PC connected to the router.

Start the CRWS Software (CRWS Users)

If Cisco Router Web Setup (CRWS) software is loaded on the router you can use it to configure the router

to connect to the Internet. The CRWS software runs on Netscape version 3.0 through 4.7, and on Internet

Explorer version 4.0 or later. Follow these steps to start the CRWS software and configure the router:

Step 1 Start, or restart, a PC connected to one of the built-in switch ports (1, 2, 3, or 4) on the router.

Step 2 Open a web browser. Make sure that the browser is set to work in online mode.

• In Internet Explorer, click the File menu, and verify that the “work offline” option is unchecked.

• In Netscape, the default selection in the File menu is set to work online.

Step 3 Type in the following universal resource locator (URL):

http://10.10.10.1

The CRWS dashboard page should appear after one or two minutes.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18

Sin comentarios

Cisco SOHO 91 Guía de instalación Pagina 12