Cisco SOHO 91 Guía de instalación descargar pdf (Pagina 5)

1-5

Cisco 831 and SOHO 91 Router Cabling and Setup Quick Start Guide

78-14783-05

Chapter 1 Cisco 831 Router and Cisco SOHO 91 Router Cabling and Setup Quick Start Guide

Verify the PC Setup (CRWS Users)

Note An optional cable used for connecting a Cisco 831 router’s console port to an async modem is available

for dial backup and remote management. The SOHO 91 router does not need this cable. This SOHO/800

Series Router Modem Cable needs to be ordered separately. Contact your router vendor to order this

cable.

Verify the PC Setup (CRWS Users)

Before you begin, verify that each computer that will be connected to the router has an Ethernet network

interface card (NIC) installed and that TCP/IP has been configured. Additionally, verify that the

computer is configured to automatically receive an IP address using DHCP. For more information on how

to configure TCP/IP, refer to the documentation that came with your computer, or refer to the Cisco

Router Web Setup User Guide, which is available on the Cisco 800 and SOHO Series Product

Documentation CD. Turn off the PCs after you verify the PC setup.

Note If SDM is installed on the router, the PC must be configured with a static IP address. Refer to the “If

SDM is Installed On the Router” section on page 1-14.

Connect the Router to a PC

Follow the steps shown after Figure 1-2 to connect the router to a PC. The connection procedure applies

to both the Cisco 831 router and the SOHO 91 router. The built-in switch on the Cisco 831 router and

the SOHO 91 router supports the auto-crossover function, whose autosensing ability allows the router

to connect to the hub or the PC automatically.

Note Leave turned off the PCs that you connect to the router. Do not turn on the PCs until after you turn on

the router.

1 Two yellow Ethernet cables 4 Product documentation and Cisco 800 and

SOHO Series CD-ROM

2 Desktop power adapter 5 Light blue console cable (RJ-45-to-DB-9)

3 Black power cord

1 2 3 4 5 6 7 8 9 10 ... 17 18

Sin comentarios

Cisco SOHO 91 Guía de instalación Pagina 5