Cisco Unified Videoconferencing Manager Manual de usuario descargar pdf (Pagina 111)

Polycom Unified Communications for Cisco Unified Communications Manager Environments

104 Polycom, Inc.

Task 2: Create a trunk

You need to add an H.225 trunk.

To add a trunk:

1 Navigate to Device > Trunk.

2 Click Add in the upper left.

3 Select H.225 Trunk (Gatekeeper Controlled). Then click Next.

4 Enter a Device Name for this trunk, and a description.

Fill out all other fields as appropriate for your system and location.

5 At the bottom of the page, select the gatekeeper created in step 3.

6 Fill in the appropriate Zone name.

7 Add Select Gateway for the terminal type.

8 Once all the fields are filled in correctly, click Save.

9 Click Reset, then Reset to force the Cisco Unified Communications

Manager to register to the gatekeeper.

To verify that your Cisco Unified Communications Manager is registered to

the gatekeeper, check to see that your Cisco Unified Communications

Manager is an active endpoint on the gatekeeper, see “Basic Cisco IOS

Gatekeeper Monitoring” on page 72 for more information.

Task 3: Configuring route groups, route lists and patterns

In this task, you create everything the Cisco Unified Communications

Manager needs to route calls out to the H.323 network, as well as receive them.

Video calls are an automatic negotiation as part of the call-setup.

• A route group in Cisco Unified Communications Manager is a collection of

gateways servicing a common system, such as ISDN or H.323.

• A route list is a collection of route groups that Cisco Unified

Communications Manager can route calls through.

• The route pattern defines what specific dial pattern or patterns may be

routed with a route list.

Note

Do not check the Media Termination Point Required check box.

Note

Zone names are case-sensitive.

1 2 ... 106 107 108 109 110 111 112 113 114 115 116 117

Sin comentarios

Cisco Unified Videoconferencing Manager Manual de usuario Pagina 111