Cisco Universal Broadband Router uBR7200 Guía de instalación descargar pdf (Pagina 39)

Cisco uBR7200 Series Universal Broadband Router Wireless Modem Card and Subsystem Installation and Configuration

78-6030-03

Command Reference

Startup Commands

Use these commands to determine the status of the current configuration, and to activate and deactivate

the link:

• show interfaces radio—To display the protocol-specific details supported

• show running-configuration—To display the configuration currently in effect on the

Cisco uBR7200 series router

• show startup-configuration—To display the system startup configuration

• shut, no shut—To shut down and reinstate the link

• write—To write the configuration currently being executed by the router to a specified device

show interfaces radio

Use this command in privileged EXEC mode to display the protocol-specific details supported by the

specified interface. The show interfaces command is also the starting point to display interface-specific

configurations such as thresholds and histograms.

show interfaces radio slot number/port numbe

Syntax Description

Example

The following example shows the display received for a modem card located in slot 3, port 0:

UBR04# show interfaces radio 3/0

Radio 3/0 is up, line protocol is up

Hardware is CWRP2P

Internet address is 192.168.168.233/24

MTU 1500 bytes, BW 44419 Kbit, DLY 11000 usec,

reliability 255/255, txload 1/255, rxload 1/255

Encapsulation HDLC, loopback not set

Keepalive not set

Last input 00:00:58, output 0:00:45, output hang never

Last clearing of “show interface” counters never

Queueing strategy: fifo

Output queue 0/40, 7 drops; input queue 0/75, 0 drops

5 minute input rate 0 bits/sec, 0 packets/sec

596 packets input, 197818 bytes, 0 no buffer

Received 0 broadcasts, 0 runts, 0 giants, 0 throttles

0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort

600 packets output, 198558 bytes, 0 underruns

0 output errors, 0 collisions, 2 interface resets

0 output buffer failures, 0 output buffers swapped out

0 carrier transitions

slot number Positive integer representing the Cisco uBR7200 series slot number

port number Positive integer representing the port number on that slot

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 125 126

Sin comentarios

Cisco Universal Broadband Router uBR7200 Guía de instalación Pagina 39