Cisco Universal Broadband Router uBR7200 Guía de instalación descargar pdf (Pagina 87)

Cisco uBR7200 Series Universal Broadband Router Wireless Modem Card and Subsystem Installation and Configuration

78-6030-03

Command Reference

Syntax Description

Example

The following command selects the image disp1a.img at the address 192.168.33.44 to be added to the

repository:

UBR04# radio image-add tftp://192.168.33.44/myDspImages/dsp1a.img

radio image-move

Use this command in privileged EXEC mode to move the specified image to the beginning of the

repository list of images. When the radio card is initiated (no shut), the repository is searched for a

firmware image with characteristics matching the current configuration. Once found, that image is

downloaded. Moving an image to the beginning of the list ensures that the image is searched first when

a configuration match is attempted.

radio image-move protocol://host/directory/filename

Syntax Description

Example

The following example selects the image dsp1a.img at the address 192.168.33.44 to be moved to the start

of the repository list:

UBR04# radio image-move tftp://192.168.33.44/myDspImages/dsp1a.img

show interfaces radio (imagehdr)

Use this command in privileged EXEC mode to display details of the images to be downloaded on a

single chip or on all chips.

protocol {mem | tftp | flash}

host IP address.

directory Directory name. (No embedded spaces accepted.)

filename Name of image file.

protocol {mem | tftp | flash}

host IP address.

directory Directory name. (No embedded spaces accepted.)

filename Name of image file.

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 125 126

Sin comentarios

Cisco Universal Broadband Router uBR7200 Guía de instalación Pagina 87