Cisco VPN 3000 Manual de usuario descargar pdf (Pagina 3)

Cisco VPN 3000 Series Concentrators Interoperability Profile

Configuring the Gateway A VPN Concentrator

Step 3 The system displays the opening message and prompts you to set the time on the VPN Concentrator.

The correct time is very important, so that logging and accounting entries are accurate, and so that the

system can create a valid security certificate. The time in brackets is the current device time.

Welcome to

Cisco Systems

VPN 3000 Concentrator Series

Command Line Interface

-- : Set the time on your device. ...

> Time

Quick -> [ 15:46:41 ] _

At the cursor, enter the correct device time in the format HH:MM:SS, using 24-hour notation. For

example, enter 4:24 p.m. as 16:24:00.

For this and subsequent parameters, to accept the value that displays in brackets, press

Enter.

Step 4

The system prompts you to set the date. The number in brackets is the current device date.

-- : Enter the date ...

> Date

Quick -> [ 11/15/2002 ] _

At the cursor, enter the correct date in the format MM/DD/YYYY. Use four digits to enter the year. For

example, enter November 15, 2002 as 11/15/2002.

Step 5 The system prompts you to set the time zone. The time zone selections are offsets in hours relative to

GMT (Greenwich Mean Time), which is the basis for Internet time synchronization. The number in

brackets is the current time zone offset.

-- : Set the time zone on your device. ...

-- : Enter the time zone using the hour offset from GMT: ...

> Time Zone

Quick -> [ 0 ] _

At the cursor, enter the time zone offset in the format +/–NN. For example, enter -5 for U.S. Eastern

Standard Time.

Step 6 The system prompts you with a menu to enable DST (Daylight-Saving Time) support. Enabling DST

support means that the VPN Concentrator automatically adjusts the time zone for DST or standard time.

If your system is in a time zone that uses DST, you must enable DST support.

1) Enable Daylight Savings Time Support

2) Disable Daylight Savings Time Support

Quick -> [ 2 ] _

At the cursor, enter 2 to disable DST support, or enter 1 to enable DST support.

Step 7 The system prompts you to enter an IP address for Ethernet 1, which is the VPN Concentrator interface

to your private network (internal LAN).

1 2 3 4 5 6 7 8 ... 24 25

Sin comentarios

Cisco VPN 3000 Manual de usuario Pagina 3