Cisco VPN 3000 Manual de usuario descargar pdf (Pagina 9)

Cisco VPN 3000 Series Concentrators Interoperability Profile

Configuring the Public Interface

Figure 6 Configuration | Interfaces | Ethernet 2 Screen | General Tab

Step 3 In the General Tab, select Static IP Addressing

Step 4 In the IP Address field, enter the IP address of the Public, or WAN interface for Gateway A,

14.15.16.17.

Step 5 In the Subnet Mask field, enter the subnet mask of the Pubic interface, in this example, 255.255.255.0.

Step 6 In the Public Interface field, verify that the box is checked to make this interface a public interface. You

must configure a public interface and check this box before you can configure a LAN-to-LAN

(Gateway-to-Gateway) connection.

Step 7 In the Filter field, verify that the filter that displays is 2. Public (Default).

Step 8 To apply your settings to the interface and include these settings in the active configuration, click

Apply. The Manager returns to the Configuration | Interfaces screen. It now displays configuration

information for the public interface.

You can accept default values for all other Ethernet interface parameters. You have completed all

required steps to configure the private and public interfaces for Gateway A.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 24 25

Sin comentarios

Cisco VPN 3000 Manual de usuario Pagina 9