Cisco WAP200 - Small Business Wireless-G Access Point Especificaciones descargar pdf (Pagina 38)

Configuring the WAP200 Access Point

Configuring Wireless Settings

Cisco WAP200 Wireless-G Access Point with Power Over Ethernet and Rangebooster 32

The access point automatically chooses the encryption algorithm used by each

client device.

To configure the WPA2-Personal Mixed wireless security settings for the access

point, follow these steps:

STEP 1 Click Wireless > Security.

STEP 2 From the Security Mode drop-down menu, select WPA2-Personal Mixed.

STEP 3 To enable wireless isolation across SSIDs, select Enabled from the drop-down

menu. Otherwise, select Disabled.

STEP 4 To enable wireless isolation within SSID, select Enabled from the drop-down

menu. Otherwise, select Disabled.

STEP 5 Provide the following information:

• Encryption—Mixed Mode automatically chooses TKIP or AES for data

encryption.

• Shared Secret—Enter a shared secret of 8–63 characters.

• Key Renewal Timeout—Enter a key renewal timeout period, which instructs

the access point how often it should change the encryption keys. The default

is 3600 seconds.

STEP 6 Click Save.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 94 95

Sin comentarios

Cisco WAP200 - Small Business Wireless-G Access Point Especificaciones Pagina 38