Cisco 2500 SERIES Especificaciones descargar pdf (Pagina 12)

• RADIUS server IP address, communications port, and secret if you are configuring a RADIUS

server, such as 10.40.0.3, 1812, and mysecretcode.

• The country code for this installation. Enter help to see a list or refer to the Cisco Wireless LAN

Controller Configuration Guide for country code information. This guide is available at

cisco.com.

• Status of the 802.11a, 802.11b, 802.11g, or 802.11n networks, either enabled or disabled.

• Status of Radio Resource Management (RRM), either enabled or disabled.

Choosing a Physical Location

You can install the controller almost anywhere, but it is more secure and reliable if you install it in a

secure equipment room or wiring closet. For maximum reliability, mount the controller while

following these guidelines:

• Make sure you can reach the controller and all cables attached to it.

• Make sure that water or excessive moisture cannot get into the controller.

• Make sure that airflow through the controller is not obstructed. Leave at least 4 in. (10 cm) clear

on both sides and rear of the controller.

• Verify that the ambient temperature remains between 32 to 104° F (0 to 40° C).

• Make sure that the controller is within 328 ft. (100 m) of equipment connected to the 10/100/1000

Mb/s Ethernet ports.

• Make sure that the power cord can reach a 100 to 240 VAC grounded electrical outlet.

3 Installing the Controller

This section includes the following installation procedures:

• Mounting the Controller, page 12

• Connecting the Controller Console Port, page 22

• Securing the Power Adapter Cable, page 22

• Installing a Security Lock, page 24

Mounting the Controller

This section includes the following mounting procedures:

• Mounting the Controller on a Desktop or Shelf

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 57 58

Sin comentarios

Cisco 2500 SERIES Especificaciones Pagina 12