Cisco 2970 - Catalyst Switch Especificaciones descargar pdf (Pagina 552)

100

101

27-58

Catalyst 2970 Switch Software Configuration Guide

78-15462-03

Chapter 27 Configuring QoS

Configuring Standard QoS

Allocating Buffer Space to and Setting WTD Thresholds for an Egress Queue-Set

You can guarantee the availability of buffers, set WTD thresholds, and configure the maximum memory

allocation for a queue-set by using the mls qos queue-set output qset-id threshold queue-id

drop-threshold1 drop-threshold2 reserved-threshold maximum-threshold global configuration command.

Each threshold value is a percentage of the queue’s allocated memory, which you specify by using the

mls qos queue-set output qset-id buffers allocation1 ... allocation4 global configuration command.

The queues use WTD to support distinct drop percentages for different traffic classes.

Note The egress queue default settings are suitable for most situations. You should change them only when

you have a thorough understanding of the egress queues and if these settings do not meet your QoS

solution.

Beginning in privileged EXEC mode, follow these steps to configure the memory allocation and drop

thresholds for a queue-set. This procedure is optional.

Command Purpose

Step 1

configure terminal Enter global configuration mode.

Step 2

mls qos queue-set output qset-id

buffers allocation1 ... allocation4

Allocate buffers to a queue-set.

By default, all allocation values are equally mapped among the four

queues (25, 25, 25, 25). Each queue has 1/4 of the buffer space.

• For qset-id, enter the ID of the queue-set. The range is 1 to 2. Each

port belongs to a queue-set, which defines all the characteristics of the

four egress queues per port.

• For allocation1 ... allocation4, specify four percentages, one for each

queue in the queue-set. The range is 0 to 100. Separate each value

with a space.

Allocate buffers according to the importance of the traffic; for example,

give a large percentage of the buffer to the queue with the highest-priority

traffic.

1 2 ... 547 548 549 550 551 552 553 554 555 556 557 ... 673 674

Comentarios a estos manuales

Sin comentarios

Cisco 2970 - Catalyst Switch Especificaciones Pagina 552

Comentarios a estos manuales