Cisco OSM-12CT3/T1 - Optical Services Module Multiplexor Guía de instalación descargar pdf (Pagina 22)

Chapter 1 Product Overview

Optical Services Modules

1-22

Cisco 7600 Series Internet Router Module Installation Guide

78-12798-07

Gigabit Ethernet Link LED Description

The GBIC-based Gigabit Ethernet LINK LEDs (see Figure 1-16) are described in

Table 1-12.

LC and SC Interface LED Description

The LEDs for the LC (see Figure 1-17) and SC (see Figure 1-18) OSM interface

ports are described in Table 1-13.

Environmental

monitoring

Orange Overtemperature condition (minor threshold exceeded).

Red Overtemperature condition (major threshold exceeded).

Table 1-11 OSM STATUS LED Description (continued)

LED Color Description

Table 1-12 Module LINK LED Descriptions

LED Color Description

LINK

Indicates port and link status.

Green Port is active (link connected and operational).

Orange The module or port is disabled through a CLI command, or the

module is initializing

1. This is a good time to verify that all LINK LEDs are functioning.

Flashing

orange

Port is faulty and has been disabled.

Off Port is not active or the link is not connected.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 35 36

Sin comentarios

Cisco OSM-12CT3/T1 - Optical Services Module Multiplexor Guía de instalación Pagina 22